All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from
HAN-Networks.
✓
iwlist ath01 bitrate //To check the bit rate of ath01 interface. The same for
other interfaces
Example:
✓
iwpriv ath01 get_mode //To check the interface mode of ath01. The same for
other interfaces
Example:
✓
iwpriv wifi0 get_txchainmask or iwpriv wifi1 get_txchainmask //To check the
spatial streams quantity supported by the Steller AP
Example:
✓
telnet 127.0.0.1:7787 then stadb and s //To check
the clients supported band
currently detected by the AP
Example:
To Next Page
Loading...
