Alcatel A5 LED - Getting Connected; Connecting to the Internet

55 56
6
Getting connected ��������������������
To connect to the internet with this phone, you can use GPRS/
EDGE/3G/4G networks or Wi-Fi, whichever is most convenient.
6�1 Connecting to the internet
6�1�1 GPRS/EDGE/3G/4G
The first time you turn on your phone with your SIM card inserted, it
will automatically configure your network service: GPRS, EDGE , 3G
or 4G.
If the network is not connected, you can turn on mobile data in
Settings > Data usage�
To check the network connection you are using, touch Settings > More >
Mobile networks > Access Point Names or Network operators.
To create a new access point
A new GPRS/EDGE/3G/4G network connection can be added to your
phone with the following steps:
•Touch Settings > More > Mobile networks > Access Point Names.
•Then touch and New APN to add new APN.
•Enter the required APN information.
•When finished, touch and touch Save.
To activate Data roaming
•Touch Settings > More > Mobile networks.
•Touch Data roaming and choose Roaming modes: Disable, National
roaming only, All networks.
•When Data roaming is disabled, you can still perform data exchange
with a Wi-Fi connection (refer to “6.1.2 Wi-Fi”).
To set preferred network type
•Touch Settings > More > Mobile networks > Preferred network
type.
6�1�2 Wi-Fi
You can connect to the internet when your phone is within range of
a wireless network. Wi-Fi can be used on your phone even without a
SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
•Touch Settings > Wi-Fi.
•Turn on .
•Once Wi-Fi is turned on, detected Wi-Fi networks are listed.
•Touch a Wi-Fi network to connect to it. If the network you selected
is secured, you are required to enter a password or other credentials
(you may contact the network operator for details). When finished,
touch CONNECT.