Alcatel GO FLIP 3 Start Guide

65
4. To insert a SIM or microSD card, push the SIM or
microSD card into the card slot with the gold-colored
contacts facing down. To remove the SIM or microSD
card, push down the plastic spring and pull the SIM or
microSD card out.
SIM card
SD card
BATTERY
To optimize battery performance, be sure to fully charge
your phone before using it for the first time.
Charge the Device
1. Insert the small end of the charging cable into the
charge port as shown.
2. Power off your phone, remove the back cover via the
notch at the bottom-left of the phone.
3. Remove the battery from the back of the phone.

Alcatel GO FLIP 3 Specifications

General

Display Size	2.8 inches
Resolution	240 x 320 pixels
RAM	512 MB
Internal Storage	4 GB
Expandable Storage	microSD, up to 32 GB
Rear Camera	2 MP
Battery Capacity	1350 mAh
Operating System	KaiOS
Processor	Qualcomm Snapdragon 210
Connectivity	4G LTE
Weight	118 grams