Alcoscan AL7000 - User Manual

User’s Manual
AL7000 is intended to measure alcohol in human breath. Readings obtained by this device are used in the
diagnosis of alcohol intoxication.
The accuracy of this device has been established at a Blood Alcohol
Concentration of 0.000and0.400%BAC.
Accuracy testing was completed according to DOT regulations.
The AlcoScan Model AL7000 analyzes a breath sample to detect alcohol in the lungs.
This reading is then converted to blood alcohol concentration (BAC).
AL7000 uses an advanced oxide semiconductor sensor to detect alcohol.
…………………………………………………………………………………………………………………………
Specifications
Method of Measure Breath sample to BAC
Range 0.000% to 0.400%BAC or 0.000‰ to 4.000‰ or 0.000mg/l to 2.000mg/lBrAC
Accuracy +/-0.01%BAC up to 0.10% BAC
Sensor Oxide semiconductor
Power Two 1.5V AA alkaline batteries (included)
Testing Capacity Approx. 100~200 with new batteries
Operating Temperature 10 – 40 degrees Celsius
Warm Up Less than 1 minute
Display 3-digit LCD
Size (mm) 105(height) X 50(width) X 18(thickness)
Weight 98g
Sensor Modules Sensor modules should be replaced approx. 300 tests,
or if damaged by improper testing or handling
HADRON

Summary

Introduction to AlcoScan AL7000

Product Specifications

How to Use AlcoScan AL7000

Sensor Module Replacement

Steps to install a new sensor module for the breathalyzer.

Important Warnings

Warning Display Indicators

Explanation of display messages like 'Flow', 'CAL', and 'bat'.

Package Contents and Accessories

12 V Alternative Power Option

Using the device with a car cigar jack lighter via the provided cable.

Mouthpiece Holder Feature

Description of the holder that can store two mouthpieces.

Product Warranty Information

Recalibration and Service

Alcoscan AL7000 Specifications

General

Sensor Type	Semiconductor
Detection Range	0.00 to 0.40% BAC
Operating Temperature	0°C to 40°C
Accuracy	±0.01% BAC at 0.05% BAC
Display	LCD
Power Source	2 x AA size alkaline batteries