- The tester will be turned off automatically in 3 minutes if there is no
input signal.
- The forced turn off will be available in Step 2, Step 3 and Step 5.
Press and hold power button more than 3 seconds to turn off the
tester.
Wait at least 30 minutes after eating, drinking or smoking before
measurement.
0.0 g/l
0.2 g/l
0.4 g/l
0.5 g/l
0.8 g/l
Czech Republic, Hungary, Romania, Slovakia
Cyprus, Estonia, Norway, Poland, Sweden
Lithuania
Austria, Belgium, Bulgaria, Croatia, Denmark,
Finland, France, Germany, Greece, Ireland, Italy,
Latvia, Luxembourg, Netherlands, Portugal,
Slovenia, Spain, Switzerland
Malta, UK
DRINK DRIVING LIMIT OF EUROPEAN COUNTRIES
Step 4. When the sampling is successful, LCD outer
lines will be turning along the edge of LCD as you
can see from the picture.
Step 5. The estimated BAC (Blood Alcohol
Concentration) will flash for 10 seconds, and the
button will be deactivated during this time. After
waiting for this time, press power button for
1 second if you want to test again.
To Next Page
Loading...
Need help?
General