Test Record
1. Over 16,000 test records can be stored.
2. Use or to move to the previous or next record.
3. For printing an individual test record, select the test record which needs to be printed,
connect the printer with the device by the cable provided, switch on the printer, select
and the test result will be printed automatically.
Setting
1. Date & Time
i. Set correct Date and Time.
ii. Select “Update” to confirm.
2. Auto Off
i. Select time limit to turn off the device automatically.
ii. Select to confirm
3. Print
i. Select “Auto Print” to print the result automatically after each test.
ii. Select number of printout copies needed.
iii. Select to confirm.
iv. If last calibration date needs to be shown on the printout, select “Cal.”.
4. Cali
i. When the screen displays “Calibration Needed”, send the device for calibration.
ii. A password is needed for calibration to ensure calibration is performed by
eligible persons.
iii. Please refer to Calibration Instruction.
5. Advanced Setting
i. Only legitimated persons are allowed for advanced setting.
ii. A Password is needed.
iii. Please refer to Advanced Setting Instruction.
To Previous Page
Loading...
