Alcovisor Mark X User Manual

Mark X
User Manual
Please read this manual carefully before using Alcovisor® Mark X.
Alcovisor® Mark X uses an electrochemical fuel cell to detect and measure the
concentration of alcohol vapor in expired breath.
Although the Alcovisor® Mark X is extremely simple to operate, it is important that the
following procedure is used each time a breath is given. Deviation from the proper
procedure will not generally affect the result of a test. However, the integrity and
capability of an operator, and even the legality of any resulting action, could be questioned
and brought into doubt if it is found later that the operator did not follow the proper testing
procedure.
PRETEST QUESTIONING
Some foods and even “non-alcoholic” drinks may contain traces of alcohol, which will
affect the test result through a “mouth alcohol” effect. To prevent this, wherever possible,
insure that a delay of about 20 minutes has elapsed since taking anything by mouth –
even medicines which may contain alcohol. Even a glass of water prior to the test will
cool the mouth and dilute the saliva, temporarily reducing the amount of alcohol in the
breath, and, consequently, the instrument reading. A delay of at least two minutes
should take place between the time of last smoked and the test.

Alcovisor Mark X Specifications

General

Measurement Range	0.000 - 0.400% BAC
Accuracy	±0.005% BAC
Display	LCD
Sensor Technology	Fuel Cell
Weight	200 g
Mouthpiece	Disposable

Summary

Pretest Questioning

Structure

Icon Description

Detailed Procedure

Screening Test

Explains how to perform a screening test using the device.

Standard Test

Details the procedure for conducting a standard breath test.

Test Record

Setting

Date & Time

Instructions for setting the device's date and time.

Auto Off

How to configure the automatic device turn-off timer.

Print

Options for configuring print settings for test results.

Cali

Information regarding device calibration procedures and requirements.

Advanced Setting

Details on accessing and using advanced device settings, requiring authorization.