Alde Compact 3030 Quick Guide

22.0
ºC
22.0
ºC
18.5
ºC
14
ºC
14
ºC
Status screen, main menu
for one temperature zone
Status screen, main menu
for two temperature zones
On-/O-button
Main switch for boiler.
Green LED indicates that the panel/boiler is on. If
it changes to red it indicates that there is an error
message.
MENU-button
Button to activate the settings menu, or return to the
status screen.
Indoor temperature
Indoor temperature shows the current temperature
and whether the circulation pump is active. Tap the
icon to change the desired temperature.
Outdoor temperature*
If an outdoor sensor is installed, the current outdoor
temperature is displayed.
Examples of submenus.
Tap the respective symbol on the status screen to reach its submenu.
Energy
Shows the energy source used (gas or 230 V). The
flame turns red when gas is in use, and the flash turns
yellow when electricity is in use. Tap the icon to select
and prioritise energy source, and to set load monitor*
and high altitude mode.
Hot water
Indicates whether hot water production is on, “boost”
or turned o. Press the respective controls to start/
switch o or increase hot water production. The ther-
mometer fills up entirely when the hot water reaches
boost temperature.
Hot water on (normal operation).
Hot water boost (prioritised hot water production
for 30 minutes).
Hot water ignore (hot water will only be produced
as a by-product of central heating).

Alde Compact 3030 Specifications

General

Brand	Alde
Model	Compact 3030
Category	Water System
Language	English