22.0
ºC
14
ºC
NOTE!
Functions marked with * are accessories.
Status screen, symbol menu
Operating messages
Displayed if temporary service interruption occurs.
Information
Flashes when there is an information message.
Can e.g. be that it is time to renew the air cushion in
the boiler or that the boiler makes a new start attempt.
230 V
Shows when 230 V is connected to the boiler.
Day Mode
Appears when the feature is on and turns green when
it is active, ie within the set time interval.
Night Mode
Appears when the feature is on and turns green when
it is active, ie within the set time interval.
LPG bottle available/empty*
Appears if a Truma DuoControl is connected to your
Alde Heating System.
Black bottle= Gas available in the first bottle.
Red bottle= First bottle empty. The DuoControl has
switched to the second bottle.
Tap the respective symbol on the status screen to go directly to its menu. These can also be reached via the menu button at the
bottom right. The path via the menu button is described in detail on the next page.
Examples of menus.
Defroster EisEx*
Appears if EisEx is turned on and turns green when
active.
Engine pre-heat*
Shown if the engine heater is installed and turned on,
and turns green when active.
Anti-bacteria
The boiler’s automatic bacterial elimination setting is
running.
High altitude mode
Flashes if the high altitude mode is active. Used in
heat production with LPG at altitudes above 1000 m.
Switch o the function when the vehicle is back below
1000 m.
Alde AquaClear UV-C*
Appears when the fresh water pump is running and
that the water filter works.
To Next Page
Loading...
Need help?
General
