ALDEN SPS 080 User Manual

Only make direct connections. Never use other terminal blocks or existing electrical circuits.
The regulator has to be put as near up to the battery as possible, sheltered from impacts and humidity.
The fuse has to be put as near up to the battery as possible.
ALDEN DECLINES ALL RESPONSIBILITY
IF THE INSTALLATION IS NOT DONE ACCORDING TO THESE INSTRUCTIONS.
How to read the indicator leds :
(green): battery full.
(green): battery charging.
These leds can be switched on at the same time, which means that the battery is almost full but continues to load.
100%
20%
* : not delivered with regulator alone.
Use the provided
*
blue cable
or a blue cable 2 x 4 mm
2
Optional Volt/
amp display
Use the provided
forked terminals
Installation diagram
cell-battery
Obligation :
Protect with a 7,5 Amp fuse
TOIT
Connect with the provided
thermofusion fittings or with
solderless terminals
Use the provided
*
black cable
or
a black cable 2 x 2,5 mm
2
ALDEN SPS 080 - 090113 - 5
Regler
Régulateur / Regolatore
SPS 80
Compatible /
Compatibile /
Kompatibel :
Kéops
®
Louxor
®
Sunpower System
®
SolarWatt
®
Girasol
®
Dakar
®
12 V
W/Ah
100%
20%
5 AMP.
80 Wp
12 V / 5 A

ALDEN SPS 080 Specifications

General

Brand	ALDEN
Model	SPS 080
Category	Controller
Language	English