Do you have a question about the ALDER TAPWARE Vito Bertoni LYNX ECO and is the answer not in the manual?
Brand | ALDER TAPWARE |
---|---|
Model | Vito Bertoni LYNX ECO |
Category | Kitchen & Bath Fixtures |
Material | Brass |
Finish | Chrome |
Spout Reach | 220 mm |
Handle Type | Lever |
Installation Type | Deck Mounted |
Warranty | 15 years |
Water Efficiency Rating | 5 Star |
Flow Rate | 6 Litres per minute |
Details on cleaning and checking flow regulators for reduced flow in showers.
Instructions for operating the rain shower and handset functions.
Conditions that void the product warranty, including pressure and removal of parts.
Install G1/2 male threaded shower outlet at recommended height of 1900mm.
Unscrew top grub screws from diverter, remove top connector piece, apply thread tape.
Attach square block plate to wall, ensuring vertical alignment and correct groove position.
Push bottom rail onto diverter underside, leaving grub screws slack.
Tighten grub screws on diverter and rail for a secure fit.
Screw rain shower onto top arm and attach shower hose to bottom of rail.