ALDI Auto XS FLX-KW-02 User Manual (English)

Questions and Answers:

D
Dale HarrisAug 4, 2025
Why does my ALDI Auto XS FLX-KW-02 Jacks car jack not lift the vehicle?
- C
  Courtney OsborneAug 4, 2025
  Your ALDI Jacks car jack might not be lifting the vehicle due to several reasons. The release valve could be open; ensure it's closed by turning it clockwise and remove any obstructing dirt. The maximum load might be exceeded, so reduce the load or use a different car jack. The oil level could be low, requiring you to add or replace the oil. Alternatively, there might be air in the system, which needs to be removed.
J
James FieldsAug 12, 2025
What to do if ALDI Auto XS FLX-KW-02 Jacks car jack has weak lifting force?
- S
  Sara MorganAug 12, 2025
  If your ALDI Jacks car jack exhibits weak lifting force, it could be due to a low oil level, in which case you should top up the hydraulic oil. Another possibility is that the oil is dirty and needs to be replaced. Also, check that the release valve is firmly closed and tighten it, removing any dirt if necessary.
N
Nichole FlemingAug 19, 2025
What to do if the saddle/load of my ALDI Jacks car jack cannot be lowered?
- K
  Kelly HerreraAug 19, 2025
  If the saddle or load of your ALDI Jacks car jack cannot be lowered, check the oil level, as too much oil can block the hydraulic system. Also, dirt may be blocking the release valve; remove and clean it, and replace the oil. Another potential cause is air in the system, which needs to be removed from the hydraulic system.
A
Adam RobertsAug 27, 2025
How to fix ALDI Auto XS FLX-KW-02 saddle that moves slowly upwards?
- J
  Jeff KellerAug 28, 2025
  If the saddle of your ALDI Jacks car jack moves slowly upwards without a load, it is likely due to air in the hydraulic system. You will need to remove the air from the hydraulic system.