After use
19
4 Fastening the loop and hook fastener
16
8
9
ā Fasten the hook and loop fastener
8
around the umbrella
9
.
5 Using the collapsible rod
17
1.
2.
15 16
1. Unfold the collapsible rod
15
and slide the ends of each section into each
other to assemble the rod (see step 1 in Fig. 17).
2. Feed the assembled rod through the hole in the protective cover
16
and run the
rod to the top of the protective cover, so that it is held up by the rod (see step 2 in
Fig. 17).
To Next Page
Loading...
