2. Apply a small amount of suitable lubricant along the edge of
the cutting device to retain a good cutting performance.
3. Keep the cutting blade sharp. Have a worn or damaged
cutting device replaced with a new one of the same type by a
qualified specialist.
Power cord
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
UK plug
If you need to replace the fitted plug, then follow the
instructions below.
IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code:
Blue – Neutral, Brown – Live
To Next Page
Loading...
