22
Digital Inverter Generator with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. XG-KF2000 • 03/2020 • 700069
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
Digital Inverter Generator with Pure Sine Wave
MODEL: №. XG-KF2000 • 03/2020 • 700069
2. Always keep the fuel safety switch (34) in the "ON" position (Fig. J1). Then
turn the fuel tap / lever (23) anti clockwise to the ‘ON’ position (Fig. J2).
3. Pull the choke lever (16) outwards to the "START" position (Fig. K). Choke is
not necessary if the engine is already warm and you’re restarting.
4. Press the engine On/O switch (2) to the “ON” position as indicated by
an “I” (Fig. L). This generator will not start without this switch in the 'ON'
position.
5. To start the engine, slowly pull the recoil starter (15) until you feel it
engage and then pull it briskly (Fig. M). When starting the engine for the
very rst time, it may require a number of attempts to start until the fuel
has travelled from the tank to the engine. Slowly pull the recoil starter (15)
to full extent 2 or 3 times to assist an enriched fuel mixture to enter the
carburettor.
6. Once the engine starts, push the choke lever (16) backwards to the "RUN"
position (Fig K).
This ensures smooth operation when under load.
Allow the generator to run for a moment unloaded to warm up before
connecting appliances to be powered are connected.
The LED power supply indicator (6) is now showing green and the unit is
ready to provide power to the outlets (Fig N).
START RUN
L.
K.
M. N.
J2.
To Next Page
Loading...