ALDI GARDENLINE DOUBLE GLIDER - Step 6: Attach Chair Seat; Step 7: Connect Chair Bucket

FIG.6
D
I
P
S
P
J
6. Attach the chair seat (E) to the arm front side using two M6*20 screws (I), two
washers (P) and two large washers (S). Attach the chair seat (E) to the arm rear side
using two M6*35 screws and two washers (P). See Fig.6
Set-upDOUBLE GLIDER
USA
FIG.7
Q
P
O
P
L
G
7. Attach the assembled chair bucket to the lower end of the rocker connector (G)
using one M6*50 screw, two washers (P), one spacer (O) and one nut (Q). Repeat
this step to assemble the other three connection points. See Fig.7
10
1877 579 1550
AFTER SALES SUPPORT
MODEL: 2416 PRODUCT CODE: 2416 04/2015
USA
info@westfieldoutdoors.com