CAUTION!
Risk of injury/damage.
There is a risk of scalding and a risk of damage to
surrounding objects from the steam.
− Never leave the steam cleaner unattended during
operation.
− Allow the appliance to cool down before changing the
cleaning cloth.
− Do not hold the cleaner foot at an angle as hot water
may run out.
− Do not touch the bottom of the cleaner foot during
operation.
PLEASE NOTE!
Risk of damage.
Surfaces can get damaged.
− Do not use the fl oor cleaner foot without the cleaning cloth or
with the carpet glider.
− Do not use on untreated wooden fl oors. When cleaning
heat-sensitive fl oors, e.g. linoleum or similar surfaces, do not
allow the steam to penetrate one part of the fl oor for too long.
− If in doubt, consult a fl ooring specialist to check whether your
fl oor can be steam-cleaned.
1. Connect the appliance to an easily accessible, properly installed socket
with a power supply of 220-240V~50Hz.
2. Turn the steam jet control
5
clockwise to the maximum setting.
17
AFTER SALES SUPPORT
AUS
Using the steam cleaner
AUS
1300 884 987
www.medion.com.au
To Next Page
Loading...