10
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: TF4601TR-S PRODUCT CODE: 702733 11/2020
Assembly
The base of the tower fan comes in two parts which fit around the tower. Both
parts fit easily together; the back half is the one with cut-outs for the power
cord (Fig. 1).
• First attach the front half of the base: align the holes in the base with the
screw holes at the base of the tower fan and lead the power cord through
the centre hole. Then snap the back half of the base to the front half and
secure with the wing screws supplied.
• Thread the power cord through the two cut-outs at the bottom of the base.
Getting Started (Cont.)
WARNING!
Never use the fan until it is properly assembled and affixed securely on the
base. The fan must only be operated in an upright position.
Align the holes in the base
with the screw holes at the
base of the fan.
Thread the power supply
cord through the centre.
Fig. 1
To Next Page
Loading...