UMFl600
TransporUMaintenanceiDisposal
and
lX. Transport
For relocation within
the workshop, the universal saw table
can be
lifted
by the
transport handles
(two
person
lift recommended). Do not drag it
across the floor.
For relocation,
any attached
Mitre
Saw must be
put
into its transport
position
(ob-
serve
your
Mitre
Saw's
operating instructions),
and the
power
supply
plug
must be
removed from
any
power
outlet.
Never move the Mitre Saw
Stand
while
any attached Mitre Saw is
plugged
in or
runnrng
For
transport
in
vehicles, any attached Mitre
Saw
must
be removed and the base
legs folded in.
X. Maintenance
.
ln order to ensure
good
mobility of
the components, dust and dirt should be
removed
regularly and all moving
parts (rollers,
extension arms) must be lubri-
cated at regular intervals.
Cleaning is best carried
out
with
compressed air or a
rag.
.
Never use caustic agents to
clean
plastic
parts.
Xl. Disposal
and
recycling
The
equipment is supplied in
packaging
to
prevent
it from being damaged in transit.
The raw materials
in this
packaging
can
be
recycled. The
equipment and its acces-
sories are made of various types of material,
such as
metal
and
plastic.
Never
place
defective equipment in
your
household
refuse. The equipment should be taken to a
suitable
collection centre for
proper
disposal. lf
you
do not know the whereabouts of
such a collection
point, you
should check with
your
local council
offices.
I
I
AFTER SALES
SUPPORT
a
@t
1300
855 831
13
E support@scheppach.com.au
MODEL: UMF1600 PRODUCT
CODE:
42929
OOl2017
To Next Page
Loading...