use/Safety regulations
UMFl600
and then attached to the Mitre
Saw Stand as described.
The maximum work
piece
length is 2.5
metres, the maximum work
piece
thickness
is
20 mm.
lf required,
use additional roller supports
(e
g.
a
roller
block) to support work
pieces.
Do not
place
working
and measuring tools
on the
multi-purpose
saw bench.
ln
general,
the work
pieces
to be
processed
must be free from foreign matters,
such
as nails or screws.
Any other use is
considered to be
not
intended. The manufacturer is not
liable
for resulting
damages,
the risk is
exclusively borne by the user.
Please note
that our equipment has not
been designed
for
use in commercial, trade
or
industrial
applications. Our warranty
will be voided if the equipment is used in
commercial,
trade or industrial businesses
or
for
equivalent
purposes.
V.
Safety regulations
A CAUTION!
Read all
safety regulations and instructions.
Read and follow
these
instructions
before using the equipment and keep
the safety
information in
a safe
place
for future reference.
.
The device
has been constructed according to the
state ofthe art
and
the rec-
ognized
safety rules. Nevertheless,
single
residual
risks may occur during the
operation.
.
Keep
children away during assembly and
operation.
.
lnspect the
product
for
damage before each use.
.
Ensure the
work
piece
is securely and
properly
clamped
during operation.
.
Risk of injury from swinging workpiece
with improper support, or work without
guidance.
.
Risk of injury for fingers
and hands caused by the rotating saw blade
of
the
table
circular saw in case of an improper
guidance
of the work
piece.
.
Larger work
pieces,
e.g.
panels,
may
tilt during the
processing
and must, there-
fore, be additionally
guided
and supported.
.
Furthermore,
non-obvious residual risks
may exist in spite of all measures
taken.
.
Residual risks
can be minimised by
carefully observing
the
"lntended
Use"
instructions
as well as the entire operating instructions.
Keep this
safety information in a safe
place.
10
AFTER SALES SUPPORT
E support@scheppach.com.au
A @ 1300
855 83'l
MODEL: UMF1600 PRODUCT
CODE: 42929 0612017
To Next Page
Loading...