Warning for charging
Do not press the power button while charging the earbuds, or it will be unable to
pair the two earbuds , in this case you will need to reset for the earbuds pairing.
Charging
Earbuds Charging
1. Put both earbuds in the charging case, when the indicator turns to white then
it’s charging.
2. While in charging status, the white signal light will stay solid.
3. The white signal light would turn off when the earbuds are fully charged.
Charging Case Charging
Restore factory setting：
If the earbuds didn’t work properly, please re_pair them as follows:
1. Clear records: turn off the phone’s Bluetooth and the earbuds, hold earbuds’
power buttons for 5 seconds at the same time and triple click the power buttons,
the indicators will light white for one second and then the earbuds will clear the
record and turn off automatically.
2. Then take out both earbuds at the same time and put them back into charging
case to re-active it.
3. Auto paring: Take out both earbuds and they will be paired automatically.
4. After restore, delete the 【
Alead TX8 】Bluetooth device on your phone and
then research and connect 【
Alead TX8 】on the Bluetooth list.
Please use the charger with output of DC5V/1A. You can use USB cable to
charge the charging case with devices which has USB ports. (Please use factory
certified charger).
To Next Page
Loading...