-107-
Alert:
Alert input: Alert settings that must be supported by the camera. Alarm type, protocols
and actions (not supported by Alecto cameras).
Abnormalities: Alarm settings of the NVR.
Event type: To select an event type: HDD full, HDD error, no network connec-
tion, IP address conict, no access, video loss. Each type can be set. Select
which event you’d like to set. Then press “Apply” and select the next event to
be set.
Alert monitor: Alert notications appear at the menu icon
Messagebox warning: A pop-up screen appears at live view.
Audio warning: The NVR starts beeping.
Send message: not supported.
Account:
Account settings: Set privileges or create a new access account with individual
conditions.
Users online: Check which users currently have access to the NVR.
To Next Page
Loading...
