-93-
12. 4. Network settings
Check “Via DHCP” if the connected router assigns the IP address automatically.
Check “Off” for the option for a xed IP address. We recommend checking
“DHCP”.
Now click the “Next” button.
13. The screen “Restart” appears, press “OK” to restart the recorder or press
“Cancel”. The data is now saved, press “Cancel” to continue immediately.
14. Set IP channel? Manually. Click “OK” to manually link the cameras with the
recorder. See the paragraph “Linking the camera(s)” for a further explanation.
To Next Page
Loading...
