Alecto DVM-75 - Add Camera; Remove Camera; Switching the Display On;Off Automatically

13
Add camera (menu )
Refer to chapter 5 for a detailed description of this function
Remove camera (menu
)
Refer to chapter 5 for a detailed description of this function
Switching the display on/o󰀨 automatically:
In this menu you may have the display switch o󰀨 after an
adjustable delay. As soon as the baby starts crying, the
display is switched back on again.
Use this menu to adjust the moment for deactivation:
1. Press the MENU button and use the
or button to
scroll to the
option.
2. Use the
and buttons to set the delay:
• X: display will NOT be switched o󰀨d
• 5 min: the display is switched o󰀨 after 5 minutes
• 30 min: the display is switched o󰀨 after 30 minutes
• 1 H: the display is switched o󰀨 after 1 hour
3. Press the MENU button to save your setting and to
leave the menu
The display is switched back on again as soon as the
baby starts making noises. Refer to the instructions under
‘Switching the sound on/o󰀨 automatically’ for setting the
activation sensitivity.
When the display is turned o󰀨 because no sound is being
detected, but you would still like to check, you can press
the LCD ON/OFF button to temporarily switch on the
display. Press the LCD ON/OFF button again to turn the
display o󰀨.
In this way you can switch o󰀨 the display beforehand
without waiting for the delay duration to elapse.