FUNC
SET
UP
RESET
7. 3 0
COST/Kwh
13:43
13
CLOCK
MO
Set cost / Kosten instellen
3 sec
FUNC
SET
UP
RESET
COST/Kwh
13
CLOCK
MO
FUNC
SET
UP
RESET
07.30
COST/Kwh
13:43
13
CLOCK
MO
07.30
FUNC
SET
UP
RESET
07.30
COST/Kwh
13:43
13
CLOCK
MO
07.30
FUNC
SET
UP
RESET
07.30
COST/Kwh
13:43
13
CLOCK
MO
07.30
FUNC
SET
UP
RESET
07.30
COST/Kwh
13:43
13
CLOCK
MO
07.30
FUNC
SET
UP
RESET
FUNC
SET
UP
RESET
FUNC
SET
UP
RESET
FUNC
SET
UP
RESET
FUNC
SET
UP
RESET
230
VOLTa c
50
Hz
13:43
13
CLOCK
WE
004
AMP
30
13:43
13
CLOCK
WE
0.
WATT
13:43
13
CLOCK
WE
13
TOTAL PRICE
TOTAL
ON TIME
5
13
POWERFACTOR
.
54
30
POWERFACTOR
0.
Kwh
13:43
13
CLOCK
WE
12
30
POWERFACTOR
Change display / Weergave wijzigen Set time and date / Tijd en datum instellen
13:43
Hold
Hold FUNC button for 3 sec. on the VOLT-ac screen to enter cost edit mode. In this mode, use SET-button to switch between
the four digits, week day and ON time and adjust the selected digit with UP button. Make a second cost by pressing FUNC
button once after setting the rst cost. After 25 seconds of no input, this setup will exit to VOLT-ac screen.
Houd FUNC toets 3 sec. ingedrukt tijdens weergave van VOLT-ac om kosten per Kwh te bewerken. In deze stand, wissel
tussen de vier getallen, weekdag en inschakeltijd van deze kosten met de SET-toets en druk op UP om het geselecteerde
getal aan te passen. Druk eenmalig op de FUNC-toets na het instellen van de eerste kosten om een tweede tarief in te stellen.
Na 25 seconde geen invoer zal de kosten-instellingen sluiten en naar het VOLT-ac scherm teruggaan.
Switch between display of time, used voltage, ampere, watt, total energy usage in Kwh and -if set- total cost, cost
in price block 1, cost in price block 2, frequency, power factor and the price per Kwh by tapping the FUNC-button.
Wissel tussen weergave van klok, gebruikt voltage, amperage, watt, energieverbruik in Kwh en -indien ingesteld-
de kosten, kosten in prijsblok 1, kosten in prijsblok 2, frequentie, factor en prijs per Kwh door kort te drukken op
de FUNC-toets.