Fig.5a
4
OPERATING INSTRUCTING FOR THE AIR CONDITIONER
Before Starting This Unit
1) Select a suitable location, make sure you have easy access to an electrical outlet.
2) Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.5 &
Fig.5a
Fig.5
NOTE: Step 2 is required only while using the cooling mode
3) Plug the unit into a 115V~60Hz grounded electrical outlet.
4) Make sure the water pump drain hose is correctly installed.
¡¡ 5) Press the on / off button to turn on the unit.
1 BEFORE USE
Dehumidifying and Cooling Operations
OO
- The operating range for cooling operating is 63 F-86 F.
- If the cooling or dehumidifying operations have been turned off and need to be turned back on,
allow approximately three minutes for the cooling or dehumidifying operations to resume.
- Make sure the water pump drain hose is correctly connected to the unit.
Power supply:
- Insert the AC Power Plug to a AC socket.
- Do not connect the air conditioner to an electrical outlet which is also being used for another
electrical appliance.
- Be sure the power supply is AC 115V~ 60Hz.
Water pump drain hose
Fig.6
To Next Page