Alera ALE-SS600 User Manual

ASSEMBLY INSTRUCTIONS
Read these instructions before starting; follow assembly
procedures carefully.
1. Base base 1 right-side up on a flat surface or workbench.
Insert support column 2 into groove at base. Bumper
stops must be towards rear of sit stand. Align the holes in
support column with holes in base. Insert bolts (4.4) from
outside and fasten down from inside with fiber hex nuts
(4.5) to secure base. Slide shrouds down column to cover
top of base. Shroud should be positioned over hex nuts.
2. Place base on the floor. Slide seat assembly 3 onto
support column. Push down front of seat to lock seat
position.
3. Mount handle (4.3) to back of seat assembly. Align holes
in handle with holes in back of seat assembly. Secure
handle with two screws (4.6).
4. Grooves in top of right and left sleeves (4.1) should be
aligned with tabs of handle cover (4.2). Be sure the seat is
facing the correct direction before inserting the handle and
handle cover.
WARNING: It is important the tabs in handle engage in
column to ensure that handle locks in place.
Insert handle, handle cover and sleeves (4.2) onto top of
support column. Tap handle into place.
Sit/Stand Series
Adjustable height stool
ALE-SS600
PARTS LIST
1 PC. 1 PC.
1 PC.
Parts bag components
4.1
4.2
4.3
4.4
4.5
4.6
1
4
2
3
ASSEMBLY
STEP 1 STEP 2
STEP 3
STEP 4
Slide shrouds down to cover
hex nuts and top of base.
Stool assembled

Alera ALE-SS600 Specifications

General

Style	Contemporary
Seat Material	Fabric
Product Type	Office Chair
Weight Capacity	250 lbs
Adjustable Height	Yes
Tilt Mechanism	Yes
Armrests	Yes
Warranty	5 Years
Chair Type	Office Chair
Material	Mesh, Plastic

Summary

Assembly Instructions

Base and Column Setup

Secure base to support column with bolts and fiber hex nuts, then slide shrouds.

Seat and Handle Installation

Attach seat assembly to column, mount handle, and install handle cover and sleeves.

Parts List

General Safety Instructions

Ergonomic Features

Seat Height Adjustment

Lift seat to unlock, slide to adjust height, and push down to lock securely.

Seat Tilt Adjustment

Raise handle to tilt seat forward for leaning, lower to lock angle.

Padded Seat Usage

Position weight on center of contoured seat for breathability and swivel.

Maintenance