EasyManua.ls Logo

ALERTON MS-2100H-MSTP - User Manual

ALERTON MS-2100H-MSTP
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation and Operations Guide
© Honeywell LTBT-MSTPMS2IOG Rev. 02
MS/TP Microset II
Question and Answer IconNeed help?

Do you have a question about the ALERTON MS-2100H-MSTP and is the answer not in the manual?

Summary

Important Safety Information and Installation Precautions

General Installation Safety

Covers reading instructions, local codes, electrostatic sensitivity, and high voltage precautions.

Electrical and Environmental Hazards

Addresses lightning danger, wiring separation, and environmental factor impacts.

Warning: FCC Compliance

FCC compliance statement for Class B digital device; potential radio interference.

Mounting

Mounting Guidelines

Recommends mounting location and considerations for environmental factors.

MS;TP Microset II Mounting Procedure

Wiring

Wire Specifications and Terminations

Details wire colors, uses, and specifications for MS/TP and power connections.

Power Supply Guidelines

Explains 24VAC power supply requirements, half-wave rectifier, and shared power precautions.

Power Supply Grounding and Wiring

Importance of Grounding and Polarity

Emphasizes critical grounding procedures and maintaining polarity for reliable operation.

Power Supply Wire Selection

Guides on selecting appropriate wire size based on run length and current draw.

MS;TP LAN Wiring

MS;TP LAN Overview

Describes communication over BACnet MS/TP using EIA-485 signaling.

Shield Grounding Requirements

Explains how to ground the shield drain wire at a single point.

Recommended MS;TP Microset II Wiring

Terminating MS;TP LAN Cabling

Advises on maintaining polarity and avoiding interference by proper cable routing.

Grounding the MS;TP LAN Shield

Explains the importance of proper shield grounding to prevent communication issues and damage.

MS;TP Cable Shield Grounding

Shield Grounding Guidelines

Provides rules for grounding MS/TP cable shields, including single point grounding.

Terminating Resistors

Explains the need for matched terminating resistors at segment ends for signal integrity.

Operational Overview

Setpoint Logic and Overrides

Operating Mode Specifics

Operating Mode Feature Comparison

Compares features across different operating modes using Table 4.

Enabling Operating Modes

Operating Mode Data Points

Lists data point settings (BVs) for MS/TP Microset II operating modes.

After-Hours Override Operation

Field Service Mode

Field Service Mode Overview

Enables technicians to query and command operating variables via button sequences.

Starting Field Service Mode

Provides step-by-step instructions for entering field service mode.

Field Service Mode Operation

Displaying Codes and Values

Shows how the MS/TP Microset II displays field service codes and their associated values.

Adjusting Values in Field Service Mode

Details the process of adjusting values for specific codes using buttons.

Exiting Field Service Mode

Explains how to exit field service mode.

Setting MS;TP MAC Address and BACnet Device Instance

MAC;Device Instance Mode Access Codes

Lists access codes for setting MAC address and BACnet device instance.

Configuring MAC Address and Instance

Provides instructions for configuring MAC address and device instance via field service mode.

BV and AV Assignments

BV Assignments (Continued)

ALERTON MS-2100H-MSTP Specifications

General IconGeneral
BrandALERTON
ModelMS-2100H-MSTP
CategorySecurity Sensors
LanguageEnglish

Related product manuals