How to do a visual inspection of my Alesis DEQ230?
Perform a brief visual inspection of the Alesis Stereo Equalizer. This can often reveal obvious issues without needing complex signal analysis. Look for burnt or loose components, as these are clear indicators of problems.
Why should I leave my Alesis DEQ230 Stereo Equalizer running overnight for testing?
Leaving your Alesis Stereo Equalizer running overnight can reveal intermittent failures, such as capacitors that leak excess current after extended use.
What happens if flexing the PC board of my Alesis Stereo Equalizer identifies issues?
If pressing on the PC board in various places reveals issues, it can indicate poor solder joints or broken traces on your Alesis Stereo Equalizer.
How does environmental testing help diagnose my Alesis Stereo Equalizer?
Applying heat and cold (using a heat gun or freeze spray) to your Alesis Stereo Equalizer can reveal thermally intermittent components. Clock crystals, ICs, and capacitors are particularly prone to this type of failure.
How can compressors help troubleshoot my Alesis Stereo Equalizer?
Using a compressor/limiter is helpful when attempting to solve low-level noise problems with your Alesis Stereo Equalizer, as well as assisting with DAC adjustments.
What are sweep tests for Alesis DEQ230?
Sweep generators are very useful in checking the frequency response envelopes of anti-aliasing filters in your Alesis Stereo Equalizer.
How to organize assembly/disassembly of Alesis DEQ230?
When removing assemblies from your Alesis Stereo Equalizer, organize screws and clips with the assemblies they were removed from. Organizer trays save time during re-assembly because similar screws and clips will not be mixed.
General| Type | Digital |
|---|---|
| Channels | 2 |
| Input Impedance | 10 kΩ |
| Output Impedance | 100 Ω |
| Input Connectors | XLR, 1/4" TRS |
| Output Connectors | XLR, 1/4" TRS |
| Sample Rate | 48kHz |
| Frequency Response | 20Hz - 20kHz |
| THD | < 0.005% |
| Dimensions | 19" x 1.75" x 7.5" |
| EQ Bands | 30-band (1/3 octave) |
| Signal to Noise Ratio | >100dB |
| Power Supply | 100-240V AC |
Lists the main features and capabilities of the DEQ230 audio processor.
Lists essential safety precautions for operating the DEQ230 equipment.
Provides step-by-step instructions for connecting the DEQ230 to a mixer.
Guides users through playing audio and testing basic equalization features.
Explains how to use the DEQ230 as an insert device with a mixing console.
How to connect the DEQ230D using digital S/PDIF connections.
Explains the fundamental principles and uses of audio equalization.
Details the functions of the DEQ230's buttons and controls.
Explains the core operational modes: Program, Edit, and Store.
How to navigate and select presets or user programs on the DEQ230.
How to enter edit mode and adjust individual frequency bands.
How to select multiple bands for simultaneous adjustment.
Step-by-step guide to saving edited programs to user locations.
How to create an audition list for quick program switching.
Adjusting output levels for channels A and B independently.
Visualizes audio signal frequencies using the DEQ230D's LEDs.
Accesses global settings that affect overall unit operation.
Explains the unique Constant Q technology of the DEQ230 and compares it to Variable Q.
Using EQ to identify and cut feedback frequencies in live sound.
How to reset the DEQ230 to its factory settings, erasing user programs.
Terms and conditions of the manufacturer's warranty for the DEQ230.
To Next Page
