Hot Keys for the ADAT HD24
Software Version 1.00
Hot Key Combination Action Description
Record + Play Restore Defaults Try this first to fix minor crashes and
software errors. Resets system variables
such as Canned Locate Names and IP
Address, etc. to their default values.
Track 16 + Track 24 Jump to MIDI OS
loader
Force the ADAT HD24 Boot Software to
load OS code via MIDI. In the case
where the software on the flash is valid
yet not compatible with the hardware, this
will force the HD24 to load new software
using the MIDI.
Track 9 + Track 20 Reconfigure Hardware This will force the PLD firmware to be
reloaded. In the case, where a PLD part is
replaced, its firmware can be loaded
through this method.
Track 1 + Track 8 Production Tests
Automated self-diagnostics mode.
Track 1 + Track 7 Diagnostics Tests
Manual self-diagnostics mode.
To Next Page
Loading...
