Alesis MultiMix8USB User Manual

Quick Start Owner’s Manual
(ENGLISH)
Manual de inicio rápido para el usuario
(ESPAÑOL)
Bedienungsanleitung
(DEUTSCH)
Manuel d’utilisation du propriétaire
(FRANÇAIS)
Manuale rapido di utilizzazione
(ITALIANO)
CONTENUTO DELLA CONFEZION
E
• CONSOLE DI MISSAGGIO
• ALIMENTAZIONE
CONTENUE DE LA BOÎT
E
• CONSOLE DE MIXAGE
• CÂBLE D’ALIMENTATION
INHALT DER VERPACKU
N
G
• MISCHPULT
• NETZANSCHLUSS
BOX CONTENT
S
• MIXING CONSOLE
• POWER SUPPLY
CONTENIDOS DE LA CAJ
A
• MIXING CONSOLE
• FUENTE DE ALIMENTACIÓN
MULTIMIX QUICK START OWNERS MANUAL
(ENGLISH)
1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place the Multimix in an appropriate position for operation.
5. Make sure all devices are turned off and all volumes are at “zero”
6. Connect all input sources as indicated in the diagram.
7. Connect the outputs to the power amplifier(s), tape decks, and/or audio sources.
8. Plug your Multimix and other devices into AC power.
9. Switch everything on in the following order:
• Audio input sources
• External effects, recording devises or equalizers
• The Multimix
• Last, any amplifiers
10. When turning off, always reverse this operation by:
• Turning off amplifiers
• The Multimix
• External effects, recording devises or equalizers
• Last, any input devices
11. Go to http://www.alesis.com/
for product registration.

Alesis MultiMix8USB Specifications

General

Type	Analog
Channels	8
Inputs - Mic Preamps	4
USB	Yes
Phantom Power	Yes
Effects	No
Faders	8
Outputs - Main	2
EQ Bands	3
Aux Sends	1
Weight	1.8 kg

Summary

Quick Start Owner's Manual

Box Contents Overview

Lists the items included in the product packaging.

Setup and Operation Guide

Safety Instructions Before Use

Essential safety precautions to follow before operating the product.

Setup Diagram and Placement Guide

Guidance on studying the setup diagram and placing the unit.

Connection and Power Sequence

Steps for connecting devices and powering on/off the system.

Product Registration and Resources

Instructions for product registration and accessing online resources.

Channel Features

Channel EQ Controls

Boosts or cuts respective frequencies for each channel.

Channel Auxiliary Routing

Routes channel signal to external devices or internal effects.

Channel Pan and Balance

Assigns channel signal to mono or stereo spectrum.

Channel Fader Control

Controls the signal level of MIC or LINE inputs.

Master Features

Auxiliary Return Controls

Controls signal levels from auxiliary returns and effects.

Phantom Power and Metering

Indicates phantom power status and monitors audio signal level.

2-Track Routing Options

Routes the 2-Track input to main mix or control room outputs.

Main Mix and Monitor Controls

Controls main output level and headphone/control room output.