Alesis qs6.1 User Manual (English)

Other manuals for Alesis qs6.1

Reference Manual176 pages

Quick Reference Guide4 pages

Questions and Answers:

E
Erin StevensJul 30, 2025
What to do if my Alesis qs6.1 Synthesizer has no sound?
- T
  Tyler JohnsonJul 30, 2025
  If your Alesis Synthesizer isn't producing any sound, there could be several reasons: * Check your audio cables and replace them if necessary. * Increase the [VOLUME] slider or Pedal 1. * Ensure the Keyboard Mode is set to NORMAL (check Global Editing, display page 6). * If an external MIDI device is sending Volume (CC#7) or Expression (CC#11) commands with a value close to 0, switch the QS6.1 from Mix Mode to Program Mode or vice versa. * If the problem persists, re-transmit higher values from the MIDI device.
B
Brandon RoseAug 5, 2025
Why is MIDI input in Mix mode not working on my Alesis qs6.1 Synthesizer?
- T
  Tracy AllenAug 5, 2025
  If MIDI input in Mix mode isn't working on your Alesis Synthesizer, consider the following: 1. Check the MIDI cables. 2. Ensure that the MIDI IN parameter is enabled for the channels you want to control via MIDI. 3. Set the Keyboard to Mix Play Mode by pushing the Mix button. 4. Set the I/O parameter to MIDI (Global Edit Mode, page 15) if the serial port is enabled.
H
Henry JonesAug 10, 2025
How to fix continuously sustaining notes on Alesis Synthesizer?
- P
  Paula McphersonAug 10, 2025
  If notes sustain continuously on your Alesis Synthesizer, here's what you can do: * If the sustain pedal was plugged in after powering on the unit, turn off the power, wait a moment, and then turn it back on. * To resolve stuck notes due to incomplete MIDI data, try switching the QS6.1 from Mix Mode to Program Mode or vice versa.
M
Melanie PierceAug 17, 2025
What to do if the display of my Alesis qs6.1 Synthesizer does not light up?
- L
  Lauren CopelandAug 17, 2025
  If your Alesis Synthesizer display doesn't light up, it might be due to no power. Please check that the power cable is properly plugged in.
W
wmooreAug 23, 2025
Why do notes from my Alesis qs6.1 sound "doubled" or "flanged"?
- D
  David ScottAug 23, 2025
  If notes played from your Alesis Synthesizer have a "doubled" or "flanged" sound, it may be because MIDI echo/Thru is enabled on an external MIDI device or computer. Disable MIDI echo/Thru on the external MIDI device.