Alexor PC9155-433/868 - Page 44

PC9155 Wireless Alarm System
5-20
Enter 55 to restart the panel (unplug the power cable from the analogue module).
[898] Wireless Device Enrollment See 2.3 "Wireless Device Enrollment"
[899] Template Programming See 4.1 "Template Programming"
[851][999] Software Default
i
Enter 00 to reset the panel to factory default.
i
•
[851][993] Ethernet Gateway IP Address
Def
0.0.0.0
••
i
•
•••
Def
000000
Def
Def
[851][994] GPRS IP Address
•
The following are 32 Character ASCII Codes
Def
i
The following are 16 Character ASCII Codes
Enter [905]. See Chapter 2.4 for details
•
[906] Wireless Siren Placement Test
•
N/A
[851][995] SIM Number
•
[851][991] Firmware Version
[851][997] IMEI Number (GSM/Ethernet Module Serial Number)
01.00.01.TT
Not Programmable (e.g., Ver 1.0 = 0100)
Def
0.0.0.0
[851][998] MAC Address (Unique to Each Module)
[851][992] Ethernet IP Address
•
•
Enter [904]. See Chapter 2.4 for details
The following are 32 Character ASCII Codes
•
Enter [990][Installer Code][990] to enable Installer Lockout
[851][996] GSM Phone Number
i
•
[905] Wireless Keypad Placement Test
[900] Panel Version
0.0.0.0
[990] Installer's Lockout Enable
•
Enter [991][Installer Code][991] to disable Installer Lockout
•
[904] Wireless Zone Module Placement Test
Enter [906]. See Chapter 2.4 for details.
[991] Installer's Lockout Disable
DDHHM
M
[851][225] GPRS Test Transmission Cycle