5.3 Programming Descriptions
5-49
[998] Initiate Global Label Broadcast
Programmed keypad labels are broadcast and installed on all system keypads from keypad 1.
Enter [][998] to broadcast the labels programmed in sections [][001]-[069] and [][100]-[125]. This function is also required for broadcasting labels down-
loaded using DLS software.
[999] Restore Factory Default Programming
Resets all keypad programming to the factory defaults. This will unenroll the keypad from the system.
ASCII Chart
i
This function can only be initialized from keypad 1. All labels should be manually programed on the first keypad enrolled on the system in order to
broadcast.
i
ASCII entries 000-007 are special characters that vary based on the language selected.
To Next Page
