Alfa Network R36AH - User Manual

Multifunctional Wireless Router
Installation Guide
R36AH
Front Panel Rear Panel
Device Overview
Funconal Descripons
In Broadband Router mode:
This port is set as WAN to be connect with Ethernet port on the DSL/cable modem
for PPPoE /Dynamic IP/Stac IP/PPTP/L2TP IP address allocaon
In 3G/4G Router mode:
This port is set as LAN to share Internet access via Ethernet connecon to the
desktop/laptop computer or network peripherals
In WiFi Hotspot Extender Router mode:
This port is set as LAN to share Internet access via Ethernet port on the
desktop/laptop computer or network peripherals
These ports are set as LAN to share Internet access via Ethernet with
desktop/laptop computer(s) or network peripherals
USB wireless adapter to connect to remote WiFi hotspot as Internet source
Plug in 3G/4G USB modem as source of Internet access
Connect an antenna to ANT port
This port is used to connect to the power adapter.
Please use the power adapter in package to ensure device proper operaon.
Interface
WAN / LAN2
PoE LAN1
USB
ANT
PWR
1
3 4
Before setting up, please check with your service provider to obtain an instruction sheet
for Internet access.
Info you will need from ISP (Internet Service Provider) company for Internet access:
xDSL PPPoE, PPTP, L2TP
An instruction sheet for Internet access from ISP (Internet Service Provider) company
A subscribed xDSL/cable modem (with RJ-45 LAN interface) from carrier company
3G/4G Intenet access service
SIM card
3G/4G USB Modem
An instruction sheet for Internet access from carrier company
Wireless hotspot Internet access service
An instruction sheet with hotspot connection parameters:
SSID, username/password, …etc. if any) for Internet Access from carrier company
Access to the RouterPreparation Before Installation
Via Wired Connection
Connect computer to LAN1 port on device via Ethernet RJ-45 cable.
Open your web browser, and type-in “
alfa.myalfasetup.com” or
“192.168.36.1” in the address bar.
Via Wireless Connection
On your laptop, tablet computer or smartphone, enable WiFi service on your
device, and search WiFi name“R36AH-xxxxxx”, then associate with it.
Open your web browser, and type-in “
alfa.myalfasetup.com” or
“192.168.36.1” in the address bar.
alfa.myalfasetup.com
Before proceeding any further, please make sure the LAN1 LED is “ON”.
Before proceeding any further, please make sure the wireless LED is “ON”.
USB 3G/4G Router
Connect 3G/4G USB modem
to router, and share Internet
with local computers,
smartphones or other network
peripherals.
Wireless hotspot extender
Obtain Internet access from a
wireless Internet service
provider (WISP) wirelessly, and
share Internet with local
computers, smartphones or
other network peripherals.
Ethernet Router
Subscribe xDSL PPPoE, fixed IP
,dynamic IP, PPTP, L2TP
Internet access from ISP
(Internet Service Provider),
and share Internet with local
computers, smartphones or
other network peripherals.
Modem
Internet
WiFi Hotspot
3G/4G USB Modem
4G Tower
Operation Modes
2
Descripons
On - Power on
 - No power
On - Device is up, and running properly
Blinking - This LED blinks when device is sending or receiving data
On - LAN port is connected
 
Flashing
On - USB device recognized, and supported by the router
Blinking - USB device NOT recognized, Internet access is not available
 
On
 
Flashing
On - Internet or intranet access is available
 - NO Internet/intranet access or the router is set to Ethernet router mode
Blinking (500ms interval): network connected, but NO Internet access
Blinking

Toggle to r

- reboot device

 - reboot device
with factory default parameters
LED Indicator
PWR
(Blue)
SYS
(Blue)
LAN
(Blue)
WAN / USB
(Blue)
WAN / LAN2
(Blue)
Wireless (Blue)

Wireless
RESET
(located in the

WAN / LAN2 PoE LAN1 PWRANT
LED Indicators & Buttons
192.168.36.1
Set Up
LAN2 PoE LAN1 PWRANT
Reset
• 1 x multi functional wireless
router
• 1 x omni RP-SMA antenna for
multifunctional wireless router
signal transmission
• 1 x 12V DC power adapter for
multifunctional wireless router
• 1 x multifunctional wireless
router installation guide (this le)
•
1 x Ethernet cable for connecting
the router and computer
Package Content
Thank you for choosing multifunctional wireless router.
Before installing, please check the following items in product package.

Summary

Package Contents and Device Overview

Package Contents

Lists the items included in the product package for the wireless router.

Device Overview - Front Panel

Details the interfaces and their functional descriptions on the front panel.

Device Overview - Rear Panel

Details the interfaces and their functional descriptions on the rear panel.

Installation Preparation and Router Access

Preparation Before Installation

Information required from ISP for internet access setup.

Access to the Router - Via Wired Connection

Connect computer via LAN1 port and access router through web browser.

Access to the Router - Via Wireless Connection

Connect device via WiFi to access router through web browser.

Operation Mode Selection and Configuration

Operation Mode Selection

Overview of available operation modes: Ethernet Router, USB Wireless Extender, USB 3G/4G Router.

Access to the Router - Via QR Code Connection

Access router via QR code scanning on smartphone/tablet.

Log In to the Router

Set device management password and log in to the router interface.

Ethernet Router Mode Setup

Configure router for broadband Internet access types like PPPoE, fixed IP, dynamic IP.

Wireless Hotspot Extender Mode Setup

Extend remote WiFi hotspot Internet access using a USB wireless adapter.

USB 3 G;4 G Router Mode Setup

Share 3G/4G USB modem Internet via router for mobile Internet access.

Local Wireless Network Configurations

Setup for wireless network name (SSID) and password for security.

Access to the Internet - Via Wired Connection

Connect computer using an Ethernet cable to access the internet.

Access to the Internet - Via Wireless Connection

Connect device via WiFi and start web browsing.

Connection Status and System Information

Connection Status

Check device activation parameters and results on the status screen.

System Information

Display system uptime, current date and time, and linked device status.

Alfa Network R36AH Specifications

General

WAN	1 x 10/100 Mbps
USB	1 x USB 2.0
RAM	64MB
Flash Memory	16MB
Wireless Standards	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Power Supply	12V/1A
Operating Modes	Router, WISP
Antennas	2 x 5 dBi detachable
Operating System	OpenWRT
Antenna	2 x External detachable antenna