To Next PageTo Next Page
Need help?Do you have a question about the Alfamacchine T 400 and is the answer not in the manual?
Information on machine warranty terms and exclusions.
Explains how the Double Mitre Saw operates, its design, and function.
Lists technical specifications and characteristics of the machine.
Essential safety precautions and warnings for operators.
Defines the intended applications and materials for the machine.
Lists conditions and uses that are prohibited for the machine.
Outlines procedures to minimize risks during operation and adjustments.
Requirements for preparing the workspace and foundation for installation.
Step-by-step instructions for assembling the machine.
Details on how to connect the machine's pneumatic system.
Instructions for making the correct electrical connection to the machine.
Checks to perform before the initial startup of the machine.
Instructions for adjusting the vertical clamping cylinders.
Procedure for adjusting the cutting angle of the blades.
Step-by-step guide on how to replace the saw blades.
Procedures for testing the machine's operation before actual use.
Defines the qualifications and training required for machine operators.
Identifies and explains the function of control buttons and switches.
Steps to follow to prepare and set up the machine for operation.
Describes how to use the machine in manual mode for cutting.
How to use the emergency stop button for immediate shutdown.
Procedures for safely isolating the machine before maintenance.
Table listing common inconveniences, their causes, and remedies.
General| Brand | Alfamacchine |
|---|---|
| Model | T 400 |
| Category | Saw |
| Language | English |
