To Next PageTo Next Page
Need help?Do you have a question about the AlfaRadio AlfaSpid RAK and is the answer not in the manual?
Details the 4-wire cable gauge needed for rotator to controller.
Warns against mixing motor and impulse wires to prevent damage.
Specifies acceptable DC/AC voltage (10-26V) and current (5A).
Procedure to reset the controller to establish North.
Defines normal rotation (360 deg CW) and over-travel limits.
Sets clockwise/counter-clockwise limits and reset value.
Sets emulation protocol and fine-tunes displayed heading.
User-adjustable counter-clockwise travel limit.
Sets beam heading for power-on reset (0 or 180 degrees).
Adjusts displayed heading to match known signal source.
Checks operation, limits, and overlap.
Explains resistance checks for motor and sense lines.
Tests motor rotation and sense circuit operation.
Addresses voltage drop and cable choice issues.
Proposes external supply with relays for higher voltage.
Suggests typical voltage (36-50V) and current (3-5A).
Details specifications for RAK and BIG RAK models.
General| Brand | AlfaRadio |
|---|---|
| Model | AlfaSpid RAK |
| Category | Controller |
| Language | English |
