Need help?Do you have a question about the Alfawise U10 and is the answer not in the manual?
General| Layer Resolution | 0.1 - 0.4 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Print Bed | Heated Bed |
| Bed Temperature | Up to 100°C |
| Machine Weight | 12 kg |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Supported Materials | PLA, ABS, TPU |
| Display | LCD |
| Frame Material | Aluminum |
| Nozzle Temperature | Up to 260°C |
| Power Supply | 24V |
Introduction and overview of the quick start guide.
Key technical specifications for the Alfawise U10 printer.
Visual representation of the initial setup and operation sequence.
Steps for safely unpacking the 3D printer and its accessories.
Guidelines for positioning the printer on a stable, flat surface.
Step-by-step guide for assembling the printer and connecting components.
How to resume a print job after an interruption or power loss.
Aligning the X axis for consistent print height using a reference object.
Adjusting the print bed for optimal first layer adhesion with paper.
Process for mounting and feeding filament into the extruder.
Heating the nozzle to prepare for filament loading.
Guiding filament through the extruder and PTFE tube.
Instructions for initiating and monitoring the printing process.
Safely removing filament from the nozzle using a soft pull method.
How to obtain or design a 3D model for printing.
Converting 3D models into G-Code using slicing software like Cura.
Transferring the G-Code file via SD card or USB for printing.
Initiating the print job and monitoring the 3D printer's performance.
A systematic approach to diagnosing and fixing printing issues.
Common issues related to slice file settings and how to resolve them.
Addressing print failures caused by an unlevel or incorrectly distanced build plate.
Solutions for clogs or issues preventing filament extrusion from the nozzle.
To Next Page
