Need help?Do you have a question about the Alfawise U30 Pro and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Print Technology | FDM |
| Layer Height | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Maximum Nozzle Temperature | 260 °C |
| Heated Bed | Yes |
| Extruder Type | Single |
| Maximum Bed Temperature | 100°C |
| Display Screen | 3.5-inch Touchscreen |
Detailed technical specifications and parameters of the U30 Pro model.
Step-by-step guide for assembling the 3D printer, covering various components.
Guide on how to correctly set the input voltage for the power supply to prevent damage.
Detailed instructions and visual guide for accurately leveling the print bed.
How the printer handles and recovers from power outages to resume printing.
Explanation of the filament run-out and broken material detection features.
To Next Page
