EasyManua.ls Logo

Algam Lighting MINIWASH 710 - Safety Instructions

Algam Lighting MINIWASH 710
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING !
Before use, and before installing this xture, read carefully user manual, and follow the safety precautions
listed on this page.
WARNING !
Very high level light output. DO NOT LOOK INTO THE BEAM.
DANGER !
Hazardous voltage, Risk of electric shock!
ALWAYS disconnect the xture from power for servicing, for cleaning or installing.
Do not connect this unit on
a dimmer power pack.
Protect the unit from rain or moisture.
WARNING !
Burn Hazard. Do not touch
. Very hot surface.
The xture becomes hot during use and remains hot 10 min after use. Do not touch the unit.
WARNING !
Fire Hazard!
Keep flammable materials away from the xture. Do not operate the xture with ambient
temperature over
4O°C.
DANGER !
Safety Hazard. Risk of injury.
This unit must be installed by professional people.
Thank you for choosing one of our Algam Lighting product. Please read this user manual carefully and follow
the instructions to avoid danger or damage to the unit due to mishandling. Keep this user guide for future
reference.
SAFETY INSTRUCTIONS
The symbols shown above are internationally accepted symbols that warn
of potential hazards with electrical products.
if one of those symbols is on your product , please read carrefully the following:
m
0.5
Locate the fixture in a well ventillated spot, away from flammable materials.
The fixture must be fixed at least 50cm from surrouding walls .

Related product manuals