Need help?Do you have a question about the Aliaxis FRIATEC FRIAMAT basic 7th generation and is the answer not in the manual?
Sets the context for the manual of the FRIAMAT basic 7th generation unit.
Explains symbols used for warnings and safety information.
Defines the purpose and scope of the FRIAMAT fusion units.
Discusses the state-of-the-art design and safety standards of the units.
Outlines responsibilities for trained personnel and owner regarding instructions.
Details risks of electric shock, fire, and explosion.
Covers requirements for power outlets and RCDs for outdoor use.
Specifies generator requirements, frequency, and usage during fusion.
Provides guidelines for using extension cables, including cross-section.
Covers opening the device, site safety, and emergency procedures.
Identifies and labels the main components of the FRIAMAT unit.
Explains the purpose and operation of the unit's function keys.
Details the different sections of the FRIAMAT display and their content.
Lists and describes the symbols associated with function keys.
Explains symbols indicating device status or upcoming maintenance.
Describes the information provided on the unit's type plate.
Instructions for using the reader wand to scan barcodes.
Guidance on using the integrated barcode scanner.
Importance of the protective cap for the USB data interface.
Explains the role of the temperature probe in fusion regulation.
Describes how the internal fans operate based on temperature.
Details the preCHECK process before fusion starts.
Explains the acoustic signals indicating operation status or errors.
How multiphase fusions interact with the preCHECK function.
Comprehensive list of technical specifications for the FRIAMAT basic unit.
How the maintenance interval is activated and displayed.
Guidelines for safely transporting and storing the unit.
Step-by-step guide to activate and register the FRIAMAT fusion unit.
Pre-fusion steps including unit placement, connections, and power-up.
Procedures for reading barcodes using the wand or scanner.
Safety precautions and steps to initiate the fusion process.
How to access and modify device settings like language and time.
Procedure for resetting the unit to factory default settings.
Accessing device details such as type, version, and maintenance date.
Manual entry of barcode data when scanning fails.
Process for updating the FRIAMAT fusion unit's software.
Details the warranty period and conditions for FRIAMAT units.
Explains the necessity and procedure for annual servicing.
Lists daily, before-use, and factory maintenance tasks and responsibilities.
Information on the proper disposal of FRIAMAT fusion units according to WEEE.
How error messages are displayed and accessed on the FRIAMAT basic.
Lists specific error codes (02-05), their meanings, and remedies.
Contact information for worldwide service stations.
Information on how to access the latest version of the manual.
General| Operating Voltage | 230 V |
|---|---|
| Operating Frequency | 50/60 Hz |
| Welding Cable Length | 3 m |
| Data Logging | Yes |
| Barcode Scanner | Optional |
| USB Interface | Yes |
| Mains Cable Length | 4.0 m |
To Next Page
