8.6.3 Exporting Network Packet
By connecting the NVR to network, the captured network data packet can be exported to a USB device such as a ash drive, HDD,
DVD-R/W and other local USB backup devices.
1. Open the Network Trac menu. Go to Menu | Maintenance | Net Detect
2. Click the Network Detection tab to open the Network Detection menu.
3. Select the backup device from the Device Name drop down list.
Note: Click the Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup device,
verify that it is compatible with the NVR. Format the backup device if the format is incorrect.
4. Click the Export button to start the export.
5. When the export is complete, click OK. Up to 1 M data can be exported during one operation.
SECTION 8: SYSTEM MAINTENANCE
To Next Page
Loading...
Need help?
General
