14 | About your monitor
*To avoid signal interference, when a wireless USB device has been connected
to a USB downstream port, it is not recommended to connect any other USB
5 SuperSpeed USB 5
Gbps (USB 3.2 Gen1)
Type-A downstream
port with NVIDIA
Reflex Latency
Analyzer.
Connect your USB 3.2 Gen 1 (5 Gbps)
device.*
Connect your wired or wireless mouse to this
port to enable NVIDIA Reflex Latency
Analyzer.
NOTE: To use these ports, you must connect
the USB cable (shipped with your monitor)
to the USB-upstream port on the monitor
and to your computer.
NOTE: When NVIDIA Reflex Latency
Analyzer is enabled, it is recommended to
only connect a wired or wireless mouse to
this port.
6 Headphone port Connect the headphone or speakers.
CAUTION: Increasing the audio output
beyond 50% on the volume control or
equalizer may increase the output voltage
on the headphones thereby increasing the
sound pressure levels.
7 SuperSpeed USB 5
Gbps (USB 3.2 Gen1)
Type-A downstream
port with Power
Charging
Connect to charge your USB device.
8 SuperSpeed USB 5
Gbps (USB 3.2 Gen1)
Type-B upstream port
Connect the USB cable (shipped with your
monitor) to this port and your computer to
enable the USB ports on your monitor.
9 SuperSpeed USB 5
Gbps (USB 3.2 Gen1)
Type-A downstream
port (2)
Connect your USB 3.2 Gen1 (5 Gbps)
device.*
NOTE: To use these ports, you must connect
the USB cable (shipped with your monitor)
to the USB-upstream port on the monitor
and to your computer.
10 Line-out port Connect your speakers.
NOTE: This port does not support
headphones.
To Next Page
Loading...
