Operating the monitor | 39
Input Source Use the Input Source menu to select between the different
video signals that may be connected to your monitor.
DP Select the DP input when you are using the DisplayPort (DP)
connector. Press the joystick button to confirm the selection.
HDMI 1 Select the HDMI 1or HDMI
2 input when you are using the
HDMI connectors. Press the joystick button to confirm the
selection.
HDMI 2
Auto Select Turn on the function to allow the monitor to automatically scan
for
available input sources. Press the joystick button to confirm
the selection.
Reset Input
So
urce
Resets all settings under the Input Source menu to the factory
defaults.
To Next Page
Loading...
