Align A10 - Stick Calibration; Initiate Stick Calibration and Input Channel Mapping

七、
Stick Calibration
搖桿通道對應及校準
Please key in the number correspondingly in below channels.
設定各項通道對應如下畫面，
請依紅色圈選內的設定值輸入至電腦。
1. Click "Mapping/Calibration" then system will read the value accordingly by
moving the stick. Then key in the number of 4-2-1-3-4-2-1-3 coorespondingly
from top to the bottom. And click "Calibration" to the next.
點選『對應/校準』後，撥動搖桿讓 FMS 飛行模擬程式讀取遙控器搖桿數值，搖
桿撥動完畢後，通道設定由上而下輸入 4-2-1-3-4-2-1-3 接著點選『Calibrate 校
準』，進行下一步安裝。