To Next PageTo Next Page
Need help?Do you have a question about the Align A10 and is the answer not in the manual?
General| Channels | 10 Channels |
|---|---|
| Modulation | FHSS |
| Dimensions | 160x95x180 mm |
| Weight | 520g |
| Frequency Range | 2.4GHz |
Visit ALIGN website, navigate to upgrade download, select FMS Simulator, and download Version 2.0 Beta 7.
Click the downloaded simulator file, choose English language, and proceed to the next installation step.
Click 'Finish' to finalize the installation; the program will launch automatically afterward.
Download the d3drm.dll file from the provided URL if the simulator fails to open.
Place the downloaded d3drm.dll file into C:\\WINDOWS\\System32 or C:\\WINDOWS\\system folder.
Click 'Mapping/Calibration', move sticks, input channel mapping values (4-2-1-3-4-2-1-3), and click 'Calibrate'.
Move the transmitter sticks through their full range of motion multiple times, then click 'Next'.
Center all sticks, click 'Finish' to end calibration, then click 'OK' to confirm.
