Align A10 - Configure Servo Reverse Settings

5. Click and enter in "Type Select" page to set up Variable Pitch.
點按『模型類型』頁面，設定選擇直升機 VARIABLE PITCH。
6.
Back to Transmitter menu. A check box to indicated it has been selected. Then
enter in "Functions" page.
回到遙控器選單介面，方框為已選取，進入『功能設定』選單。
7. Click and enter in "Reverse" page to set up reverse on servo channel 2,3,4.
Then complete A10 transmitter setup.
進入『正反向』設定伺服器，選擇 2、3、4 通道反向，A10 遙控器完成設定。