b. Move your RC transmitter sticks and confirm travel direction on aileron/ elevator/ rudder/
throttle correctly matches the PC interface display. Select the " Reverse"on
corresponding channels that need reversing.
確認遙控器各動作，副翼、升降、尾舵、油門搖桿方向是否正確，如果介面上顯示方向與
搖桿方向相反，可點選該頻道上的"正反向"，讓介面與遙控器一致。
c. Select "Calibrate"and move all sticks on RC transmitter to maximum and minimum
position, then click on "Complete"to finish.
點選"遙控器行程校正"將遙控器搖桿都推至最大、最小，然後按下"完成"來結束校正。
11
To Next Page
Loading...