3. Click ".exe executable file" and show up upgrade interface, and the lower left in the screen will
show up current firmware and "Connected" in green when APS-M and PC connected well, and
please click "Update" to move on.
點按.exe 執行檔會出現更新頁面，APS-M 與電腦連線成功，畫面左下角會目前出現版本綠
字 ”Connected ”，請按 ”Update” 鍵進行更新
If it's shown "Searching" and "Disconnected" in red, it means fail connect, please make sure if
connection of computer and APS-M is abnormal.
若出現 Searching…紅字 ”Disconnected ”代表連線失敗，請確認電腦與 APS-M 的連線是否異
常。
3
To Next Page
Loading...