11. After setting up the receiver type, please enter to "Gimbal Control Setup" and please make
sure to turn off below settings to secure product safety during flying to prevent product damage
or any injury:
Channel 9 / Pan→ Please turn off.
Channel 11 / Roll→ Please turn off.
接收器類型設定完成後，請至〔雲台控制設定〕將預設頻道 9 / 頭向功能及預設頻道 11 / 水平
功能關閉，避免因設定時誤觸，造成飛行機飛行異常，嚴重者導致機體損壞或人員傷亡。
12. After gimbal setup, please enter to "Multicopter Type and Gain" to select your multicopter. If
the warning notice window pop up, please make sure to double check your multicopter
selection. The APS-M will get working error for any wrong selection, or even it can't fly
successfully.
雲台控制設定完成後，請至〔多軸機類型與感度〕的設定頁面中直接選取您的機型，切換多軸
類型時會跳出確定更改的警告，請再次確認多軸機的機型是否選取正確，選擇錯誤會影響 APS-M
無法判斷多軸機對應之軸數，導致無法飛行。
9
To Next Page
Loading...